Six Auto
Electron
Automati
Programm
Mechanic
Solar Po
PLC Cont
PLC Cont
 PRODUCTS PRODUCTS Central Air Conditioning Training & Testing Equipment
Refrigeration & Air Conditioning Trainer
Central Air Conditioning Training & Testing Equipment
Order No.66972215
销售价格:¥
联系邮箱:sales@choieo.com

1.   This central air conditioning trainer adopts PLC as the main controller, the running control of complete air conditioning system is achieved by communication between computer and PLC. The running parameters can be gathered by sensors and transferred to PLC through A/D module.

2.   Both manual control and computer control are available on this trainer. The manual control can be conducted by using buttons on the panel of control cabinet, which are connected with related PLC input terminals.

3.   This system is composed of system control cabinet with control panel, system training objects, simulated room and measuring meters. The training objects consist of refrigerating unit, cooling water system, chilled water system and heat supply system. The control panel can be divided into five areas, they are main power operation control area, control button and working state indicating area, AC contactor control area, frequency control area and central control processor area.

4.   There are two frequency converters on frequency control area, which are used for the control of cooling water pump and chilled water pump, the PT100 temperature sensor can gather the inlet/outlet water temperature difference of chilled / cooling water and send the data through A/D module, PLC and D/A module, which will be processed to 4-20mA analog quantity signal for driving frequency converter to start adaptive control.

5.   Safety precautions: overvoltage, overcurrent, overload, electric leakage and ground connection protections, confirming to relevant national standards.

 

> EXPERIMENTS

1.   Central air conditioning structure understanding training

2.   Central air conditioning starts and stops training

3.   Central air conditioning running and operation training

4.   Central air condition running condition and each running parameters detection training

5.   PLC advanced programming and PLC installation, wiring, debugging training

6.   Central air conditioning system electrical control circuit wiring and principle training

7.   Central air conditioning system fault setting and troubleshooting

8.   Different control modes of air conditioning system

 

>TECHNICAL PARAMETERS

1.   Power supply: Three phase five wire AC380V ±10%, 50Hz

2.   Rated power: 3800W(refrigerating), 2500W (heating)

3.   Rated current: three phase 1.8~5.8A (refrigerating), single phase 9.8A (heating)

4.   Refrigerant: R22, 5kg

5.   Circulating air volume: 350m3/h

6.   Overall dimension: 4000mm×1200mm×2100mm

7.   Noise: 35-40dB (A)

8.   Safety protection: Overvoltage, overcurrent, overload, leakage, ground connection protection.

TOP
友情链接: CHOIEO Alibaba  |  
Kdesign LOGO
ADD:Pushi Village, Qiaoxia Town, Yongjia County, Wenzhou, Zhejiang, China  TEL:86-577-66961004  FAX:86-577-66961004
Copyright © 2013-2015 Wenzhou Choieo Trade Co.,Ltd All rights reserved.